Questions and answers
About curtains, blinds and shutters: light, privacy, measuring and fitting.
Planning and measure
What should I prepare for a consultation?
Your suburb, room photographs, approximate opening sizes, the main privacy or light problem, and any plans for flooring, ceilings or electrical work. Final manufacturing measurements are verified separately.
Does an enquiry confirm an appointment or installation date?
No. Appointment availability, project scope and timing are confirmed after the enquiry is reviewed. Fabric availability, final measurements, hardware and installation conditions all affect the programme.
How long will the project take?
Timing depends on the selected fabrics, hardware, making requirements and site readiness. Ask for the project-specific programme with the quotation, including any items that remain provisional.
What happens before a Drapewell quotation is finalised?
Before a quotation is finalised, Drapewell reviews the window, intended room use, fabric or material, lining, hardware, control method, fixing conditions and installation access. Final manufacturing dimensions are confirmed separately from early approximate sizes.
This process prevents a decorative choice from being approved before its weight, stack, projection, clearances or daily operation are understood. Project-specific availability, lead time and technical documentation remain subject to the selected specification.
Can Drapewell plan one window or an entire home?
Drapewell can begin with one problem window or coordinate a room-by-room whole-home schedule. A coordinated scheme does not require the same treatment everywhere; it requires consistent decisions about colour, proportion, hardware, privacy and operation.
Bedrooms may need stronger light control, living rooms may preserve outlook and kitchens may need a compact treatment. Recording each opening and its purpose allows different products to feel deliberate within the same interior.
Do you measure and install in Sydney?
Site measure and professional installation can be included where appropriate. Share the address, plans or photographs so the required visits and scope can be confirmed.
How should I clean the finished treatment?
Follow the care instructions supplied for the exact fabric and construction. Linings, interlinings, coatings and trims can require different treatment from the face cloth. Do not assume every curtain or Roman can be washed or steamed.
Curtains
Should curtains touch the floor?
It depends on the fabric, floor and way the room is used. A precise clearance is practical beside doors and on frequently cleaned floors. A soft break can suit a more relaxed decorative curtain, but it is a deliberate finish that needs more care, not a substitute for accurate measurement.
Do I need sheer and blockout curtains together?
Not in every room. A double treatment is useful when you want filtered daylight and daytime screening from the sheer, then stronger privacy or room darkening from the lined curtain. The track space, total stack and the order of the layers should be planned together.
Which curtain heading is right for my room?
S-fold creates a calm, continuous rhythm and works well across contemporary glazing. Pinch pleats give a more tailored top and suit both classic and formal rooms. Fabric behaviour, available stack space, track type and the surrounding architecture should guide the choice.
What does curtain fullness change?
Curtain fullness is the relationship between the flat fabric width and the finished track width. It changes fold depth, textile presence, pattern repetition, weight and the amount of stack that remains when the curtain is open.
More fabric is not automatically better. A bulky cloth can become congested, while an under-specified sheer may look flat. Drapewell reviews fullness with the selected heading, fabric and available stack zone before manufacture.
When should a curtain use lining or interlining?
Lining can change opacity, body, colour appearance, privacy and protection of the face fabric. Interlining adds another textile layer and may create a fuller hand, but it also adds weight, bulk and stack that the track and fixing must support.
The room objective should lead the choice. A decorative living-room curtain, west-facing bedroom and acoustic brief may require different constructions even when the face fabrics look similar. Confirm the complete layered treatment, not only the lining label.
Can you reuse my existing track?
Possibly, after its condition, fixing, capacity and compatibility have been assessed. A heavier lining or different heading can change the load and operating requirements. Reusing a track should be a specification decision, not an assumption.
Will a sheer curtain give me privacy at night?
Not reliably. Privacy depends on the fabric and the relative light levels inside and outside. A separate opaque treatment is usually needed where evening privacy matters. Review a hanging sample with the room lit after dark.
Does blockout fabric make a room completely dark?
The cloth blocks light through its face, but light can still enter around the edges, above the treatment or at a centre join. Track position, returns, overlap and fitting position affect the finished result. Discuss the required darkness before choosing the fabric.
How much fullness should I choose?
Fullness is the relationship between fabric width and finished treatment width. The right amount depends on the heading, fabric body, pattern and desired stack. There is no single multiplier that makes every cloth look better; review the heading and fabric together.
Can curtains be motorised?
Possibly, after the curtain weight, heading, track position and fixing conditions are assessed. Some existing curtains can work with a compatible motorised track; others need changes to the heading or hardware. Access to power or a suitable charging arrangement must also be resolved.
Roman blinds
How do I decide between a Roman and a roller blind?
A Roman is a constructed textile treatment with visible folds and a raised stack. A roller wraps around a tube and needs a fabric designed to track evenly. Compare texture and pattern, the space above the window, cleaning, control and the amount of glass each covers when open.
What fabric works best for a Roman blind?
A suitable Roman blind fabric must fold repeatedly without becoming unstable, excessively bulky or distorted. Weight, weave, stretch, embroidery, pattern scale, seam position and the way the cloth behaves with its proposed lining matter more than the fibre name alone.
Drapewell checks the face fabric and lining as one moving construction. Linen and linen blends can work beautifully, but the actual weave and stability should be assessed in daylight and formed into a representative fold before the blind is ordered.
Are Roman blinds suitable for wide windows?
Roman blinds can suit wide windows when the finished fabric and lining weight, headrail capacity, fabric joins, glazing divisions and raised stack are resolved together. One very wide blind is not automatically the cleanest or most reliable answer.
Dividing an opening can improve independent control and alignment with doors or mullions, but it introduces vertical light gaps. Drapewell measures each opening and reviews how the group will look both fully lowered and partly raised before confirming the arrangement.
Does a blockout Roman blind make a room completely dark?
A blockout lining stops light passing through the main fabric face, but a Roman blind is not a sealed system. Light can remain around the perimeter, above or below the blind and at small construction points, depending on the fitting and window.
For demanding sleep conditions, the whole opening should be reviewed. A face fit, greater overlap, a separate curtain layer or another compatible perimeter treatment may control more light than changing the lining alone.
Can I use the same fabric for curtains and Romans?
Sometimes. A fabric that hangs well as a curtain may behave differently when supported horizontally and repeatedly folded. Confirm the fabric’s suitability, lining, joins and pattern placement for both constructions before approving a coordinated scheme.
Can a manual Roman blind be motorised later?
Sometimes, but retrofit should not be assumed. Headrail compatibility, finished weight, space, power, fabric condition and access determine whether conversion is sensible or whether a new complete system will be more reliable and serviceable.
Blinds
What does Drapewell design and install in Sydney?
Drapewell designs, specifies, makes and professionally installs custom curtains, Roman blinds, roller and specialty blinds, shutters, motorised systems and coordinated soft furnishings for Sydney homes and selected commercial projects.
The recommendation starts with the room rather than a fixed product. Daylight, evening privacy, glazing, window operation, furniture, fabric behaviour, stack space and installation conditions are considered before the treatment and hardware are confirmed.
Plantation shutters
Are plantation shutters suitable for bedrooms?
They can provide useful privacy and light reduction, but are not a sealed blockout treatment. Louvre edges, panel joints and the frame can admit light. For shift work, daytime sleep or light-sensitive sleepers, consider a coordinated additional layer or a different room-darkening treatment.
Can shutters be fitted to old or uneven windows?
Often, subject to the opening and available fixing surfaces. Measure the actual reveal at several points and check diagonals, sash movement and architraves. The frame strategy should resolve the site conditions before manufacture; forcing a square shutter into an uneven reveal is not a sound plan.
Can shutters be installed on bay windows?
Often, but the angles, corner meeting points, frame depth and panel opening paths must be resolved together. A layout that looks aligned when closed can still conflict when opened. A site measure is especially important at a bay.
Can shutters be used with curtains?
Yes, where there is enough space for both treatments. Plan curtain-track projection, the curtain stack and the shutter-panel swing together. Check the open as well as the closed arrangement so fabric does not obstruct everyday access.
Do shutters provide complete blockout?
Interior shutters provide adjustable privacy and strong daylight control, but they are not a sealed blackout system. Light can remain between louvres, around panels, at frame junctions and wherever the installation must allow parts to move.
The final result depends on louvre closure, panel overlap, frame selection, window shape and surrounding light sources. Bedrooms with demanding darkness targets may need another treatment or a layered approach rather than a stronger marketing claim.
Are shutters suitable for bathrooms?
Only where the selected material, coating and hardware are approved for the actual moisture exposure. A ventilated bathroom is different from a direct-splash area. Confirm product limitations and care instructions rather than treating PVC, composite or a painted finish as a universal waterproof specification.
Motorisation
How is motorisation specified?
The window size, assembled furnishing weight, access and daily routine inform the system choice. Power or charging access and the required controls should be agreed before hardware is ordered. App, voice and home-automation compatibility depend on the selected products and integration.
Will every system work with my smart home?
Compatibility depends on the motor, control protocol, gateway and existing platform. Provide the platform details before ordering so the exact integration and any additional components can be confirmed.
Does motorisation remove the need for a safety assessment?
No. Removing a manual operating chain can reduce one hazard, but the whole product, including any accessible cords and the installation, still needs to be assessed and used according to its instructions.
Battery or hardwired motorised curtains?
In a finished home, a suitable rechargeable system may avoid opening walls. During a renovation, investigate hardwired power before ceilings close. In a new build, plan the motor side, curtain pocket, wiring, controls and service access together. Neither approach is universally better.
Swipe the table sideways to compare both power options.
Do motorised curtains need an electrician?
A rechargeable system may use an existing charging point without new fixed wiring. If new or altered fixed electrical wiring is required in NSW, that work belongs with a licensed electrical worker. Confirm the motor’s supply requirement before the electrical plan is finalised.
What happens during a power outage?
A mains-powered system normally loses powered operation until supply returns; a charged battery system may still operate. Manual operation during an outage is model-specific, so ask for the exact motor’s instructions and demonstrate the approved procedure at handover.
Cushions and upholstery
Is this an online cushion shop?
No. The service is centred on custom soft furnishings measured and coordinated around the room, furniture and window treatment.
Can cushions and upholstery be discussed during a curtain consultation?
Yes. Relevant furniture, window seats, bedheads and outdoor settings can be reviewed as part of the same in-home conversation.
Do all fabrics need to match?
No. Related tones, textures and pattern scales usually create a more natural room than repeating one fabric everywhere.
Trade and commercial
When should Drapewell join a trade or commercial project?
Drapewell should be involved while window, ceiling, joinery, electrical and interior-finish decisions can still be coordinated. Early review can identify track recesses, structural support, motor power, access and glazing conflicts before surrounding work closes.
A useful starting package includes drawings, window schedules, room uses, programme constraints and the decisions still open. The product is then specified around the project condition rather than forced into an unresolved opening at installation stage.
Can architects, builders and interior designers enquire here?
Use the project pathway and include the drawings or window schedule, design intent, programme and any documentation requirements. Responsibilities for measurement, structure, electrical work and installation should be coordinated as the brief develops.
Can I provide a fabric already selected by my designer?
Yes, share the fabric reference and intended treatment. We can review suitability, available quantity, lining, pattern matching and construction before confirming the making scope.
Can you help if the specified fabric is over budget?
We can discuss alternatives with a similar design direction, while comparing composition, appearance and any performance requirements rather than substituting on price alone.
Still unsure? Call 0426 835 880 or book a home visit.